background image

SLASH KIT • 5 

INTRODUCTION

INTRODUCTION

4mm

HARDWARE DESCRIPTIONS

The following chart is provided to help you identify the many different sizes and types of hardware that are used in the 

assembly of this model. Note the difference between the length measurements of the roundhead and countersunk screws. 

A ruler is provided at the bottom of each page to measure the length of the screws in millimeters.

3x12mm Countersunk Screw

3x12mm Buttonhead Screw

3mm

12mm

3mm

12mm

5x10x4mm Ball Bearing

10mm 5mm

Repeat Icon

Repeat step the number 

of times indicated. 

Optional Part Icon

Optional part available. 

Refer to included 

parts list.

Aluminum Part Icon

Aluminum accessory 

part available. Refer to 

included parts list.

x2
x4

ICON DESCRIPTIONS

There are icons in this assembly instruction which indicate certain actions needed during assembly.

Turn Icon

Indicates assembly 

needs to be flipped 

or turned around.

Oil Bottle

Use included silicone 

shock oil. 

Grease Tube

Apply included 

grease to part 

indicated.

RADIO SYSTEM INSTRUCTIONS

The Traxxas TQ 2.4GHz radio system is provided with your unassembled kit. Complete instructions for operating the radio 

system are included in the Slash Owner’s Manual. You can download the Owner’s Manual for the Slash, as well as the manuals 

for all Traxxas vehicles, at Traxxas.com.

WARRANTY STATEMENT

Every effort has been made in component design and material selection to make your model as durable as possible and still 

maintain a weight consistent with good handling. Because this model is intended for operation under severe conditions, no 

warranties are expressed nor implied relating to the longevity of the parts. If you find that a part has a defect in materials or 

workmanship, please return it to us BEFORE IT IS USED, and we will gladly replace it. Damage caused by excessive force, abuse, 

neglect or failure to adhere to the precautions outlined in the literature contained with your model will void the warranty.

CCS

Countersunk Cap Screw

GS

Set (Grub) Screw

CS

Cap Screw

PTW

PTFE Washer

FCS

Flathead Cap Screw

MW

Metal Washer

BCS

Buttonhead Cap Screw

E

E-Clip

CSS

Cap Shoulder Screw

BB

Ball Bearing

NL

Nylon Locknut

ABBREVIATIONS

White: 

Silicone

Black: 

Black Lithium

Summary of Contents for SLASH 58014-4





































Reviews: