www.traxontechnologies.com
©2022 TRAXON TECHNOLOGIES - AN OSRAM BUSINESS. ALL RIGHTS RESERVED. TRAXON™, TX CONNECT®, ARE TRADEMARKS OF TRAXON TECHNOLOGIES. U.S. PATENTS, E.U.
PATENTS, JAPAN PATENTS, OTHER PATENTS PENDING. SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
Installation Guide
02/22 V1.3
9 of 23
2.3 On-Site Installation
•
DO NOT attempt installation in wet or severe weather conditions.
•
DO NOT leave and expose any Media Tubes
®
HO or LED Engines
unconnected under wet/raining or snowing environment.
•
IP failure induced by stressed/damaged cables during or after installation
will not be under warranty by Traxon Technologies.
•
ALWAYS keep the cables protected from sharp objects and ensure no
damage is generated on the cable.
Failure to keep Media Tube
®
HO within the operating temperature range of –30°C to +55°C
/ –22°F to +131°F and storage temperature range of –40°C to +70°C / –40°F to +158°F will
void the product’s warranty.
2.3.1
On-Site Installation
1. Fix Mounting Bracket to installation surface with anchor bolts, if Mounting Bracket
method is being used.
2. Attach Media Tube
®
HO to Mounting Bracket and affix Mounting Plate (see below
diagram). If using the Mounting Studs option, simply secure using anchor bolts (see
Mounting options for the Tube FIG.10).
FIG.7: Fixing the Mounting Bracket to Installation Surface
Lock with screw driver
Tightening Torque 1~1.2Nm
1~1.2Nm
