www.traxontechnologies.com
©2022 TRAXON TECHNOLOGIES - AN OSRAM BUSINESS. ALL RIGHTS RESERVED. TRAXON™, TX CONNECT®, ARE TRADEMARKS OF TRAXON TECHNOLOGIES. U.S. PATENTS, E.U.
PATENTS, JAPAN PATENTS, OTHER PATENTS PENDING. SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
Installation Guide
02/22 V1.3
15 of 23
4.2 LED CONTROL
The LEDs on the Media Tube
®
HO are controlled by DMX512/e:pix. Each pixel on the Tube
uses four (4) channels, for R, G, B and W. Pixel number 1 begin on the IN connector side, and
it uses the first four channels.
Pixel 1 Pixel 2
W
BGR
RGB
Pixel n
Control Channel Number
R
+4(n-1) + 1
G
+4(n-1) + 2
B
+4(n-1) + 3
W
+4(n-1) + 4
Where: n is pixel number along the Tube.
(Pixel 1 is located near the IN connector.)
NOTE: This is applicable for Media Tube
®
HO RGBW 4-channel mode only.
For “+White” / “Auto White” feature, please refer to corresponding manual.
