www.traxontechnologies.com
©2022 TRAXON TECHNOLOGIES - AN OSRAM BUSINESS. ALL RIGHTS RESERVED. TRAXON™, TX CONNECT®, ARE TRADEMARKS OF TRAXON TECHNOLOGIES. U.S. PATENTS, E.U.
PATENTS, JAPAN PATENTS, OTHER PATENTS PENDING. SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
Installation Guide
02/22 V1.3
8 of 23
2.2.3
Mounting Bracket
If the Mounting Bracket method of installation is used, it is recommended to fix it to the
installation surface before the Media Tube
®
HO is secured to the bracket
FIG.6: Media Tube
®
HO Mounting Bracket
30mm / 1.2”
33mm / 1.3”
25mm / 1”
2.2.4
Installation Sequence
1. Plan for any possible bending of cables (see Section 2.2.2).
2. Measure the correct distances for Mounting Brackets.
3. Connect Media Tubes
®
HO with LED Engines in the daisy-chain manner outlined in the
System Diagram to form large installations.
4. Perform functional check on all Media Tubes
®
HO and inspect cables and Mounting
Bracket for any damage. Check for any abnormalities with the control signal.
5. Report any functional defect found to your nearest Traxon Technologies office. DO NOT
attempt to install Media Tubes
®
HO with functional defects on-site.
