Travis Industries Endeavor, Manual

Page: 135 / 190

JJ Calibrations, Inc.
7007 SE Lake Rd
Portland, OR 97267-2105
Phone 503.786.3005
FAX 503.786.2994
Certificate of Calibration
Certificate Number:
692254
PO:
Property #:
Serial #:
User:
Model:
Description:
Make:
Accuracy:
*Recommended Due:
As Received:
As Returned:
Action Taken:
Order Date:
Procedure:
Calibrated on:
Technician:
°C % RH Environment: Department:
B729400181
N/A
Mettler Toledo
07/11/2019
Within Tolerance
01/11/2019
19
123
Calibrated
±0.0005g
DCN 500887
N/A
181203
01/11/2019
OMNI-00637
Analytical Scale, 120g
Within Tolerance
43
O n S i t e
MS104TS/00
Authorized By:
N/A
0723.01
256A Rice Lake W0133K Mass Set, 05/30/2019 660578
Std ID Manufacturer Model Nomenclature Due Date Trace ID
Standards Used
Parameter
Unit
UUT Uncertainty
Measurement Description Range
Measurement Data
Before/After
Accredited =
ü
Min Max Reference *Error
Force
g 5.7E-04
10.00000
10.0000 0.0000
ü
9.9995 10.0005 g
g 5.7E-04
30.00000
30.0000 0.0000
ü
29.9995 30.0005 g
g 5.7E-04
60.00000
59.9998 0.0002
ü
59.9995 60.0005 g
g 5.7E-04
90.00000
89.9999 0.0001
ü
89.9995 90.0005 g
g 5.7E-04
120.00000
119.9998 0.0002
ü
119.9995 120.0005 g
Remarks:
* Many factors may cause the unit to drift out of calibration before the recommended due date. Any reported error is the absolute value between the reference and the unit.
Omni-Test Laboratories
13327 NE Airport Way
Portland, OR 97230
Calibration
Uncertainties include the effects of the unit.
*
*
Inspector Rev # Issued
15 01/14/2019
Reviewer
3
JJ Calibrations, Inc. certifies that this instrument has been calibrated in accordance with the JJ Calibrations Quality Assurance Manual with the stated procedure using
standards that are traceable to the National Institute of Standards and Technology (NIST), or other National Measurement Institutes (NMI's), or by using natural
physical constants, intrinsic standards or ratio calibration techniques. The quality system and this certificate are in compliance with ANSI/NCSL Z540-1-1994,
ISO/IEC 17025-2005, ISO 10012-1, the ISO 9000 family and QS 9000. The expanded uncertainties of measurements for this calibration are based upon 95%
(2 sigma) confidence limits. Unless otherwise stated, a test accuracy ratio (TAR) of 4:1, if achievable, is maintained. The results reported herein apply only to the
calibration of the item described above. This report may not be reproduced, except in full, without prior written consent of JJ Calibrations, Inc.
JJ Calibrations, Inc. quality system has been assessed and accredited to ISO/IEC 17025:2005.
Page 1 of 1 Certificate:
692254
Page 135 of 186