Travis Industries Endeavor, Manual

Page: 10 / 190

Travis Industries, Inc.
Model: Endeavor
Report Number:0028WS062E
OMNI-Test Laboratories, Inc.
Table 10 – Test Configurations
Run Startup Procedures Combustion Air
1
Fuel Loading: Kindling and start-up fuel loaded together, a torch was used
for 15 seconds to establish a fire. At 58 minutes placed fuel load into the
firebox and closed the loading door. Loading required less than 1 minute to
complete.
Door: For kindling and start-up fuel, loading door was closed by 15 seconds.
Test fuel load; fuel loading door was closed 30 seconds after loading.
Primary Air: Air control fully open for the entire test.
Secondary: No user control for secondary air.
Fan: Fan turned onto high 49 minutes after starting kindling fire, remained
on high for the entire test.
Bypass: Not used for ignition of kindling or loading test fuel load.
Fully open for
entire test.
2
Fuel Loading: Test fuel loaded onto coal bed generated by test number 1 by
45 seconds.
Door: Closed by 50 seconds.
Primary Air: Fully open, then set to 19/64” by 9.5 minutes.
Secondary: No user control for secondary air.
Fan: Fan on high entire test.
Bypass: Not used for loading test fuel load.
Fully open for first
9.5 minutes, then
set to 19/64”.
3
Fuel Loading: Kindling and start-up fuel loaded together, a torch was used
for 15 seconds to establish a fire. At 54 minutes placed fuel load into the
firebox and closed the loading door. Loading required less than 1 minute to
complete.
Door: For kindling and start-up fuel, loading door was closed by 15 seconds.
Test fuel load; fuel loading door was closed 30 seconds after loading.
Primary Air: Air control fully open for the entire test.
Secondary: No user control for secondary air.
Fan: Fan turned onto high 45 minutes after starting kindling fire, remained
on high for the entire test.
Bypass: Not used for ignition of kindling or loading test fuel load.
Fully open for
entire test.
4
Fuel Loading: Test fuel loaded onto coal bed generated by test number 3 in
55 seconds.
Door: Closed by 60 seconds.
Primary Air: Fully open, then set to fully closed by 13 minutes.
Secondary: No user control for secondary air.
Fan: Fan on high entire test.
Bypass: Not used for loading test fuel load.
Fully Closed
5
Fuel Loading: Kindling and start-up fuel loaded together, a torch was used
for 20 seconds to establish a fire. Fuel loading required 25 seconds to
complete.
Door: For kindling and start-up fuel, loading door was closed by 25 seconds.
Test fuel load; fuel loading door was closed 30 seconds after loading.
Primary Air: Air control fully open for the entire test.
Secondary: No user control for secondary air.
Fan: Fan turned onto high 45 minutes after starting kindling fire, remained
on high for the entire test.
Bypass: Not used for ignition of kindling or loading test fuel load.
Fully open for
entire test.
Page 10 of 186