66
Optional Equipment
(for qualified installers only)
© Travis Industries
9/22/2020 - 1521
430 EG GSR2
5. Install the Ember glass, included with the insert, on the perforated area directly in front of the grate.
Place a thick layer of the ember glass over the perforations making sure to cover all of the holes.
Lightly dress the ember glass with the black touch-up paint provided. Check the appearance with the
lights on and add additional paint, as needed, for a realistic glowing ember appearance.
6. Place Log #1 as shown below. The two slots on the bottom of the log sit over the pins on the burner.
With the rear log in place, push it all the way back
Bottom View of Log
Scan this code with a QR
reader on your cell phone to
watch a video of the setup.
http://vimeo.com/289322734
