Optional Equipment (for qualified installers only)
57
© Travis Industries
9/22/2020 - 1521
430 EG GSR2
7. Install the Ember glass on the perforated area directly in front of the grate. Place a thick layer
of the ember glass over the perforations making sure to cover all of the holes.
8. Lightly dress the ember glass with the black touch-up paint provided. Check the appearance
with the lights on and add additional paint, as needed, for a realistic glowing ember
appearance.
NOTE:
If power is supplied to the insert it can help to turn the lights on while painting so you can
determine an appropriate amount of paint for a realistic ember appearance.
NOTE:
We recommend that you use a piece of paper, cardboard as a shield to mask the log grate and
burner from overspray (see below).
NOTE:
If power is supplied, turn the rheostat until the embers have a realistic and aesthetically pleasing
appearance. Use the remote to turn the Ember-Glo lights on and off.
Scan this code with a QR
reader on your cell phone to
watch a video of the setup.
http://vimeo.com/289322734
