www.transvu.co.uk
Configuration & Operation Guide
97
Remote Reporting
This menu details the configuration requirements for the unit to report to a Remote Video Receiving
Centre (RVRC) following alarm activation.
Note: This menu will only be displayed if ‘Remote Reporting’ is selected in the
System Settings->Features menu.
Primary Hostname
This is the IP address or URL of the initial host that the unit will transmit an
alarm message to.
Primary Dial Profile
It is possible for the alarm message to be transmitted via the Ethernet network.
Secondary Hostname
If the unit is unable to contact the primary host, an alternative route can be
identified via a secondary host. If there is only one alarm receiving IP address,
you must enter the details in both the primary and secondary connection
settings.
Secondary Dial Profile
It is possible to select a separate dial profile for the
secondary host.
Public (NAT) Address
This is the public IP (or domain name) for a unit connected to the Internet via a
NAT Router or Firewall. This field should be left blank if NAT is not used e.g. a
private network.
Video Server Port
This field allows the RVRC to connect to the unit through a router that is using
port forwarding e.g. if the video server does not appear on port 80 (HTTP), to
the external network. Enter the port number used for forwarding here if required.
Alarm Server ref. ID
This is the reference name/ID that will be presented to the RVRC viewing
application. It should therefore have some significance to the Operator.
Remote Alarm Reporting This must be enabled for the unit to automatically connect
on alarm.
