TransVu Compact Configuration & Operation Manual Download Page 65

Page: 65 / 150

www.transvu.co.uk

Configuration & Operation Guide

Schedule

This menu allows the Timer Function names to be configured. The Timer Function enables the unit

to automatically be put into set/unset mode at specific times on specific days. This can help reduce

unnecessary alarm triggers. The mode will be set by the DVR that the camera is connected to.
When the unit is in Set or Unset mode, combine with different recording qualities and rates under

normal and alarm conditions for a high degree of control in a range of situations.

The Setup page allows configuration of the schedule including naming the modes of operation and

controlling when the unit changes between modes.
The RVRC page allows the Schedule to be changed to force a Day, Night or Weekend condition.

The Holiday & Weekend menu allows the unit to be automatically switched to Override mode for

individual days i.e. public holidays or during a weekend (or any defined period).

Summary of Contents for Compact























































































































































Search results

Summary of Contents for Compact

Reviews:

Related manuals for Compact

Brands by name

Popular brands

TransVu Compact, Configuration & Operation Manual

Search results

Summary of Contents for Compact

Reviews:

Related manuals for Compact

Brands by name

Popular brands