TransVu Compact Configuration & Operation Manual Download Page 36

Page: 36 / 150

TransVu Compact

Maintain

This menu allows the unit to be reset and a software upgrade to be performed via a connected USB

device. Current unit settings can also be saved for future use and previously saved settings restored.

Configuration

Default (Green)

Select to return the unit to its factory default settings.

Note: Selecting the Default button will cause the system to reboot.

Save (Purple)

Select to save current unit settings to the selected media.

Restore (Blue)

Select to restore previously saved settings from the selected media.

Note: Selecting the Restore button will cause the system to reboot.

To/From

Select the relevant media device to save to or restore from i.e. USB.

Export Logs

Export Logs (Yellow)

Select to export all Logged data to a connected

external device.

Select the relevant media device to save to export to.

Server

Reset (Red)

Select to cycle the power to the unit.

IMPORTANT:

To upgrade the unit, insert a media device containing relevant software upgrades

and select ‘Reset‘.

Note: For the latest software upgrades, please refer to the website: www.dedicatedmicros.com

Summary of Contents for Compact























































































































































Search results

Summary of Contents for Compact

Reviews:

Related manuals for Compact

Brands by name

Popular brands

TransVu Compact, Configuration & Operation Manual

Search results

Summary of Contents for Compact

Reviews:

Related manuals for Compact

Brands by name

Popular brands