www.transvu.co.uk
Configuration & Operation Guide
17
System Settings
The menus under the System Settings heading allow the unit’s core settings to be viewed, changed
and the system software upgraded.
The Attributes option displays details about the unit including the IP address, unit serial number,
MAC address and software version.
The Status page displays information about the unit’s operating condition, shows how long the unit
has been operating and the reason for the last reset. It also shows camera status and displays any
failed cameras.
The Language page allows the system language to be set. The language can also be changed for
the current session only.
The Time and Date page allows the unit time and date settings to be adjusted, including setting
the timezone.
The Serial Ports page allows each of the two serial ports to be individually configured for one of a
range of operations, including, debug, PPP and telemetry.
The Power Manager page allows the configuration of power saving procedures such as the timeout
limits for ignition off and low voltage level detected.
The Audio page shows the settings available for each of the audio channels and allows configuration
of audio quality.
The Features page allows control of the different features that are available within the software
including Email reporting, webcam support and control of the display resolution.
The Maintain page allows the current configuration to be saved, and for previously saved settings to
be loaded. It also enables easy upgrade of the system software.
The PowerScript Mgmt page allows installed PowerScripts to be activated/deactivated on start-up.
The Database page allows the database to be reset, and can be used to limit the number of entries
held in it.
