3. INSTALLATION
3-21
MANAGEABLE HUB
Setting Network and SNMP Parameters
SNMP Network Management is configured by setting network and SNMP
parameter values.
Network Parameters
To set the Network parameter values at an attached terminal:
1.
At the StackMaster™ Configuration Main Menu
MAIN>
prompt,
type and enter:
MAIN> i p
The StackMaster™ Network Parameters Menu comes up:
2.
Referring to the Site Configuration Data Sheet (See 2.3), type and
enter modified configuration values in the format:
IP > < p a r a m e t e r > = < v a l u e >
3.
Verify the modified configuration values by bringing up the same
menu:
IP > i p
The menu is redisplayed with the modified values.
4.
Save the configuration values to non-volatile memory by typing
and entering:
IP>
save
IP>
r e s t a r t
IP>
q u i t
The StackMaster™ restarts and the parameter values entered are written to
non-volatile memory.
Network Parameters Menu
ipaddr
= 192.251.144.253
name
= NONE
submask = 255.255.255.0
domain = NONE
router
= 0.0.0.0
nameserver= 0.0.0.0
IP>
Select a parameter [main ==> root menu OR ? ==> help]