Transition Networks SMMC-E, User Manual, Page: 15 / 86

1. INTRODUCTION
1-7
MANAGEABLE HUB
When the SNMP Management circuit board is installed and managing the
StackMaster™ Stack, the SNMP Management circuit board indicators are
active. The Management (Mgmt) Enable indicator is illuminated when the
SNMP Management circuit board is installed. When the StackMaster™
Stack is functioning normally, the eight Management Status indicators
cycle in a steady roll.
Switches
The reset switch reinitializes the StackMaster™ 6-Port 10BaseFL hub.
NOTE: If the SNMP Management Board is installed in the StackMaster™
6-Port 10BaseFL hub and the StackMaster™ 6-Port 10BaseFL hub is
installed at the top of a Stack, the reset switch resets the entire Stack.
Power
Reset
1 2 3 4 5 6
Port
Status
RX TX RX TX RX TX RX TX RX TX RX TX
1 2 3 4
5 6 7 8
Mgmt
Enable
Management
Status
6 Port StackMaster™ FL
Mgmt
Enable
1 2 3 4
5 6 7 8
Management
Status
T R A N S I T I O N
n e t w o r k s
Power
Reset
1 2 3
4
5 6
Port
Status
RX TX RX TX RX TX RX TX RX TX RX TX
1 2 3 4
5 6 7 8
Mgmt
Enable
Management
Status
6 Port StackMaster™ FL
Reset
T R A N S I T I O N
n e t w o r k s