3-16
StackMaster™
3.7
Connecting Units to Power
The StackMaster™ Stack is connected to power by connecting each of the
StackMaster™ Units to power.
NOTE: Connect StackMaster™ Units from bottom to top.
To connect the StackMaster™ Stack to power:
1.
At StackMaster™ Unit back, locate the Unit power receptacle and
associated fuse.
NOTE: Fuse must be installed at correct setting for power source voltage
before connecting to AC outlet.
2.
Verify that fuse is installed at correct setting for power source
voltage.
NOTE: The installed fuse rating is indicated by the reading at lower right
corner of fuse holder.
If not installed at correct setting for power source voltage:
•
Carefully open fuse receptacle, using a small flat blade
screwdriver.
•
Rotate fuse holder 180° to the correct rating orientation.
•
Install fuse holder in correct rating orientation.
•
Close fuse receptacle.
3.
Plug hub end (female) of power cord into StackMaster™ Unit
power receptacle.
4.
Plug outlet end (male) of power cord into correct voltage AC wall
socket.
5.
At StackMaster™ Unit front, verify that POWER LED is
illuminated.
6.
Repeat steps 1 through 5 until all StackMaster™ Units have been
powered.
110-120
110-120
220-240
220-240
110-120 Orientation
220-240 Orientation
Fuse Holder
Fuse Holder