Neptune 5500
5
CHAPTER 1:
INTRODUCTION TO THE TRANSCELL NEPTUNE 5500 SERIES CHECK-
WEIGHER
The Transcell Model
NEPTUNE 5500
Series Checkweigher is an easy to use high speed, wash
down, stainless steel bench scale. The main function of the NEPTUNE 5500 is to compare
programmed weight readings to pre-set tolerance limits that define an ACCEPTABLE range. If
the current weight reading is within an ACCEPTABLE weight range the green
TARGET
LED’s
light. If the current weight reading is less then the ACCEPTABLE range the amber
UNDER
LED’s
light. If the current weight reading is greater then the ACCEPTABLE range the red
OVER
LED’s
light.
The
NEPTUNE 5500
features a simple pushbutton keyboard. The
NEPTUNE 5500
also features
a simple programmable print format. Utilizing 3-5volt TTL outputs you can readily send out check
weight results to a PC or control other external devices. The
NEPTUNE 5500
is available in two
platform sizes and four avoirdupois weight capacities.
If you are an installer, the scale’s installation and wiring instructions are found in Appendix D. The
scale contains two main setup menus: Front panel access is available for simple calibration and
configuration. Prior to installing the scale, please read this manual carefully and completely. Store
the manual in a safe and convenient place so it will be available if you have questions concerning
the setup and operation of the scale.
FIGURE 1-1: Front Panel
MODEL
CAPACITY /
GRADUATION
MODEL
CAPACITY /
GRADUATION
NEPTUNE 5500-5
5lb (2.5kg) 12”W x 12" L
NEPTUNE 5500-30
30lb (15kg) 18”W x 18” L
NEPTUNE 5500-10
10lb (5kg) 12"W x 12" L
NEPTUNE 5500-50A
50lb (25kg) 18”W x 18” L
NEPTUNE 5500-20
20lb (10kg) 12"W x 12" L
NEPTUNE 5500-100
100lb (50kg) 18”W x 18” L
NEPTUNE 5500-50
50lb (25kg) 12"W x 12" L
NEPTUNE 5500-200
200lb (100kg) 18”W x 18” L
