Neptune 5500
10
TABLE 2-1: KEYPAD FUNCTIONS
KEYS
MEANING
ZERO
The
ZERO
key sets the current Gross weight to Zero, provided the amount of weight to be
removed is within the specified Zero range and the scale is not in motion. It is also used to move
down in the user and configuration menus.
UNITS
The
UNITS
key switches the weight display to an alternate unit, min and max values. The
alternate units can be Lb, Kg, Oz, Lb-Oz, Gross, Tare. It is also used to move up in the user and
configuration menus. Setting F24 to 0 allows units key to repeat units without prompting for set
point entry.
TARE
The
TARE
key is used to establish a pushbutton Tare provided the scale is not at or below
Gross Zero. . It is also used to move left in the user and configuration menus.
The
key has two functions. First, it can be used to transmit an on demand output through
the serial port to a printer or other peripheral device. Secondly, pressing and holding the PRINT
key will reset to scale to the weighing mode with no max and min values.
SET/GROSS
The SET function enters max and min values. The Gross function switches between gross and
net weighing modes.
Figure 3.2: ANNUCIATOR DETAIL
Table 3-1:
ANNUNCIATOR DEFINITIONS
Annunciators
MEANING
GROSS
Indicates the scale is displaying the Gross weight.
STABLE
Indicates that the scale is in a stable weight mode condition, and therefore
seeing no motion.
TARE
Indicates that a tare has been established in the system.
ZERO
Indicates that the current displayed weight reading is+/- 0.25% displayed division of
the acquired zero.
