M
alli
/ Model / Modèle
CWE 1-2P-E15
CWE 2-2P-E25
CWE 3-2P-E25
CWE 4-2P-E30
CWE 5-2P-E30
1500 Watt
230V
~
3 x 1,5mm
2
7 A
8 A
Nimellinen kokonaisteho
Nominal installed power
Puissance nominale installée
Nimellinen virtajännite
Nominal power voltage
Tension nominale d'alimentation
Kytkentäkaapeleiden määrä ja koko
Number and section of connecting wires
Nombre et section des câbles de raccordement
Virta max.
Current input
Courant absorbé
Suositeltu sulakekoko (Tyyppi gG) ylikuormitussuoja
Recommended fuse (Typo gG) for overload protection
Fusible conseillé (Type gG) pour la protection de surcharge
2500 Watt
230V ~
3 x 2,5mm
2
11 A
12 A
230V
~
3 x 2,5mm
2
13,5 A
16 A
3000 Watt
31
UNT-SVX16I-XX
SÄHKÖVASTUS
2 putkimallin kaseteissa on
sähkövastus,
jota ohjataan
lämmityspatterin
venttiilillä.
Sähköinen lämmitysvastus on
kuumavesiventtiilin
ohjauspaikalla.
Vastus on ilmatiivis ja patteri/
k
ennostoputkien sisällä ja sen
vuoksi se voidaan maadoittaa
ainoastaan tehtaalla.
CWE 1-2-3-4-5
yksiköissä oleva
sähkövastuksen syöttö on
yksivaiheinen
230V 50Hz.
Laitteessa on 2 turvatermostaattia,
jotka laukeavat laitteen
ylikuumentuessa
. Tällöin
varavirtarele (sisältyy toimitukseen
)
laukeaa
, jolloin virransyöttö
laitteeseen katkeaa.
Reset
ointi tulee
suorittaa ohjeiden ja varoitusten
mukaan, jotka löytyvät sivulta
32-32A.
ELECTRIC
RESISTANCE
The Cassette 2 pipe models are
available with electric resistance that
is controlled in place of the heating
battery valve.
The electric resistance is controlled
in place of the hot water valve and
not as integration to it.
The resistance is hermetically sealed
and supplied inside the battery pipes
and therefore can be only factory
mounted.
The supply of the electric resistances
fitted
on
CWE 1-2-3-4-5
units is of
type single phase 230V 50Hz.
The box includes no. 2 safety thermostats
which intervene in case of internal over-
heating, opening an auxiliary power
relay (included in the shunt box) which
stops the power supply to the resistances.
Reset shall be performed according to
the indications and warnings indicated
at page 32-32A.
Käytä
H07
RN-F
kaapelia
(yhteensopiva CEI 20-27)
yksikön ja lämmitysvastuksen
virtalähteen kytkentöihin.
Sähkövastuksen virransyötön tulee
olla erillinen yksikön virransyötöstä.
Varmista, että sähkövastuksella on
oma maadoitus.
Varmista, että pää virtalähteen
kytkemiseen käytetään
omnipolar kytkintä, jossa on
vähintään 3,5 mm kytkentä
etäisyys.
For the power supply connections of
the unit and of the electric resistances,
use H07 RN-F cable (compliant with
CEI 20-27).
The power supply to the electric
heaters must be separate from the
power supply to the unit, and have
its own earth.
Check that an omnipolar switch with
a minimum contact distance of 3,5 mm
is used for the connection to the mains
power supply.
Summary of Contents for UNT-SVX16I-XX
Page 78: ...UNT SVX16I XX MUISTIINPANOT...
Page 79: ...UNT SVX16I XX MUISTIINPANOT...