17
UNT-SVX16I-XX
•
Sen jälkeen puhallinpatteriyksikkö
painetaan leikkauskohtien läpi siten,
että jakorasi
a
on pääl
l
imäisenä ja
sen
jälkeen yksikkö suoristetaan
tasaisesti
aukkoon.
•
kiinnikkeiden hakaset
mahdollistavat nopean tilapäisen
asentamisen.
Sijoittamisessa
hakaset tulee
kiinnittää laitteen
seiniin kierteisillä
ruuveilla.
•
Laite tulee sitten kiinni
tt
ää
kierretankoihin.
On tärkeää, että laite
on
täysin
suorassa
.
• The fan-coil unit is then tilted and
pushed through the cutout with the
terminal box on top and then placed
level over the cutout.
• The hooks on the brackets allow a
quick temporary installation.
Following positioning, the brackets
must be attached to the appliance
walls by means of tapping screws.
• The appliance must then be
fix
ed
to the threaded rods.
It is essential for the appliance to
be exactly level.
The unit can be installed using any
other method considered appropriate
by the installer, providing it is in
accordance with current legislation.
Fresh air ducts are connected as
follows:
Huomioi:
•
Suorakulmion muotoiset ilma-
aukot voidaan yhdistää pyöreisiin
ilmastointikanaviin käyttämällä
erityistä
sovitin
kappaletta ("FAC
lisätarvike - koodi 35169490-001).
•
Puhtaan ilman tulisi olla käsiteltyä
ja
suodatettua eikä se saa olla
liian
kylmää.
As concerns the fresh air, note the
following:
• The rectangular air openings can
be connected to circular air ducts
using the special
fittings
(“FAC”
accessory - code 35169490-001).
The connections of the fresh air to
the fan convector must not interfere
with the lighting system in the false
ceiling.
• The fersh air should be treated,
filtered and m
ust not be too cool.
Laite voidaan asentaa asentajan
parhaaksi katsomalla
lainmukaisella tavalla.
Raitis
ilmakanava yhdistetään
seuraavalla tavalla:
Raitis
ilma kytkennät
puhallinkonvektoriin eivät saa
sotkeentua katon
valaistusjärjestelmiin.
Summary of Contents for UNT-SVX16I-XX
Page 78: ...UNT SVX16I XX MUISTIINPANOT...
Page 79: ...UNT SVX16I XX MUISTIINPANOT...