24
BAS-SVX080B-EN
Using the TD7 or TD12 Display
The Symbio 800 controller can be used with either a TD7 or TD12 display (7" or 12"). For example,
Intellipak units use the TD7 and chiller units generally use either the TD7 or TD12. On these units,
the display comes standard from the factory with the equipment. The information displayed on
the TD7 or TD12 is meant for general status and troubleshooting and is the go-to source of
information for the end user of the machinery. No laptop, or hand help device, is necessary to get
this information.
Every unit type will have different information on the display. This document is written in a
generic sense and cannot cover every possible type or example. However, the examples shown
in this section are from an Intellipak rooftop unit (TD7). The intent of this information applies to
all unit types.
Supported Languages
The display supports built-in languages depending on the equipment type and region.
Security
Log In
By default, security for the display connection is disabled and the Log In screen is hidden. When
security is enabled for the display connection, the display will show the Log In screen. A valid
User ID and Password is required to access the status and settings on the display.
Both the User ID and Password screen display the virtual keyboard shown in . The User IDs,
Passwords, and password complexity are configured by the Symbio™ UI and can’t be configured
using the display.
User ID Screen
To Log In enter a valid User ID. Press Next button to complete the User ID entry and navigate to
the Password screen. Press the Clear to erase the User ID.
Figure 9. User ID screen
