Trane TCONT 800 Series Installation, Operation And Maintenance Manual Download Page 10

Page: 10 / 88

BAS-SVX080B-EN

Dimensions

Figure 2. Symbio 800 dimensions

Mounting the Symbio 800

The Symbio 800 unit controller mounts on the standard 35mm DIN rail. No other means of
mounting the controller is provided.

Battery and Battery Tray

The battery (BR2032 3 V) backs up the internal real-time clock over power fail. Under normal
operating conditions, the battery life is 10 years.

otte

e:: When replacing the battery or closing the battery tray, have the Symbio 800 controller

powered up to maximize battery life.

Figure 3. Symbio 800 battery tray location

USB Ports

The Symbio 800 USB 2.0 ports support the Tracer USB LonTalk module, WiFi module, LTE
Modem, and USB mass storage.

errv

viie

Summary of Contents for TCONT 800 Series

























































































Search results

Summary of Contents for TCONT 800 Series

Reviews:

Related manuals for TCONT 800 Series

Brands by name

Popular brands

Trane TCONT 800 Series, Installation, Operation And Maintenance Manual

Search results

Summary of Contents for TCONT 800 Series

Reviews:

Related manuals for TCONT 800 Series

Brands by name

Popular brands