Trane mP30, Installation Operation & Maintenance

Page: 6 / 48

INSTRUCTION MANUAL
UG30 CONTROL
6 (44)
mP30-UG30 - Rev. 1.5 - Date: 18-03-2004 EN
LAY-OUT OF UNIGUARD BASE UG30/mP30 CIRCUIT
The figure shows the rear of the UG30/mP30 control, with input and output terminals.
The following are shown in the figure:
- low down: connectors ("1" - "2" - "3"), with the analogue and digital inputs and outputs;
- lay-out for the clock circuit (optional);
- lay-out for the RS485 serial circuit (optional);
1 C5 C3/4 OUT3 C1/2 Y1 Y2
OUT5 OUT4 OUT2 OUT1 GND GND
2
G0 B4 B2 B3 ID2 ID4 ID6 ID8 ID10
G B1 GND +V ID1 ID3 ID5 ID7 ID9
3
C6 NO6 C7
NC6 NO7