Trane IntelliPak CG-SVX02B-EN, Installation & Operation Manual

Page: 19 / 64

19
Installation
Table 1
Typical Unit Weights & Point Loading Data
Unit Condenser Operating Operating Weight Distribution @ Unit Mounting Points
Size Fin Mat’l. Weight 1 2 3 4 5 6
C20 Alum. 1870 595 470 470 335 — —
Copper 2085 690 475 490 430 — —
C25 Alum. 2085 700 470 490 425 — —
Copper 2370 760 540 580 490 — —
C30 Alum. 3060 865 430 725 340 430 270
Copper 3450 875 525 830 385 555 280
C40 Alum. 3290 560 580 580 595 480 495
Copper 3680 570 755 605 540 640 570
C50 Alum. 3900 685 715 720 750 505 525
Copper 4435 840 870 660 680 680 705
C60 Alum. 4885 885 820 855 985 620 720
Copper 5820 935 1220 875 920 1010 860
Notes:
1. Mounting locations correlate with those shown in point loading illustration.
2. Operating weight includes refrigerant, oil and water.
3. Shipping weight includes refrigerant and oil charges.
Figure 3
Rigging and Center-of-Gravity Data
WARNING
Heavy Objects!
Do not use cables (chains or slings) except as shown.
Each of the cables (chains or slings) used to lift the
unit must be capable of supporting the entire weight of
the unit. Lifting cables (chains or slings) may not be of
the same length. Adjust as necessary for even unit lift.
Other lifting arrangements may cause equipment or
property-only damage. Failure to properly lift unit could
result in death or serious injury. See details below.
Note: Use spreader bars as shown in the diagram.
Refer to the Installation manual or nameplate for
unit weight. Refer to the Installation instructions
located inside the control panel for further rigging
information.
Shipping Center of Gravity
Unit Weight X Z
Size (Max. Lbs.) Inches mm Inches mm
C20 1875 39" 991 26" 660
C25 2085 40" 1016 26" 660
C30 3065 37" 940 30" 762
C40 3290 42" 1067 45" 1143
C50 3900 52" 1321 45" 1143
C60 4865 54" 1372 46" 1168