Installation
50
3.
Position the riser board in the bracket. The slots are positioned outward, see the followingillustration.
The screw holes on the riser board and bracket align indicating a correct installation.
4.
Secure the riser board to the riser bracket with screws.
5.
Install the PCIe card (on page 48).
6.
Install the access panel (on page 29).
Removing an expander board
This section applies to SKU2 model only.
To remove an expander board:
1.
Power down the server, and then detach all of the power cords from the power supplies.
2.
Remove the access panel (on page29).
3.
Disconnect the cables from the expander assembly.
4.
Grasp the expander assembly, and then gently lift theexpander assembly up to remove theexpander
assembly from the chassis.
