TracVision M5/M7 User’s Guide
45
Chapter 3 - Settings
9. After waiting 15 minutes, repeat Steps 5-7 to run a
second Check Switch test.
10. Verify the values on your TV match those required for
selected service (see Figure 3-16 or Figure 3-17). If your
values do not match, turn off the antenna, then turn it
back on and repeat Steps 5-9.
NOTE: If you chose to install only one satellite in Step 3 on page 43, an error
message will appear on the TV. This is normal.
Figure 3-16 DISH 500 Second Check Switch Results on TV Screen
Figure 3-17 ExpressVu Second Check Switch Results on TV Screen
11. Exit the menu and allow the receiver to download the
program guide.
NOTE: You do not need to perform this procedure again unless you add
another receiver or you reconfigured a receiver(s) for home use.
Port
1
1
2
2
Satellite
119
119
110
110
Trans
Odd
Even
Odd
Even
Status
Reception Verified
Switch
SW42
Port
1
1
2
2
Satellite
91
91
82
82
Trans
Odd
Even
Odd
Even
Status
Reception Verified
Switch
SW21