TracVision M5/M7 User’s Guide
17
Chapter 2 - Operation
Dual-Sat Automatic Mode - Preferred for One or Two Receivers*
The antenna switches between satellites automatically as you change
channels using the primary receiver’s remote control. The primary
receiver is the receiver connected to the antenna’s RF1 cable (see
Figure 2-9). If an optional secondary receiver is connected, you can use
its remote control to switch between the channels on the currently
selected satellite.
*NOTE: Custom service configurations must use Manual mode.
Figure 2-9 Dual-Sat Automatic Mode - Receiver Controls
RF2
Secondary
Receiver
(optional)
Changes
channels on
current satellite
RF2
Automatically
switches
satellites/channels
Primary Receiver
Grounding
Block
RF1
Switchplate
RF1
Antenna
