TRACTION MPL50-Li, Instruction Manual

Page: 7 / 180

5404-MAN-001-EN-0D
BATTERY CHARGER MODEL MPL50-Li
INSTRUCTIONS FOR USE
WARNING
1. DO NOT USE THIS BATTERY CHARGER OUTSIDE, FOR INDOOR USE ONLY.
2. DO NOT USE THIS BATTERY CHARGER IF IT BECOMES WET OR IF THE OUTPUT OR INPUT
LEADS ARE DAMAGED.
3. DO NOT OBSTRUCT THE VENTILATION SLOTS IN THE CHARGER CABINET.
4. THE BATTERY MUST BE CHARGED IN A WELL-VENTILATED AREA.
5. WHEN THE BATTERY IS REQUIRED, DISCONNECT FROM THE MAINS BEFORE
DISCONNECTING FROM THE BATTERY.
6. THE PLUG IS THE PRIMARY DISCONNECT AND SHOULD BE READILY ACCESSIBLE AT ALL
TIMES.
A. CONNECT THE OUTPUT LEAD (RED) TO THE POSITIVE (+) TERMINAL.
B. CONNECT THE OUTPUT LEAD (BLACK) TO THE NEGATIVE (-) TERMINAL.
C. CONNECT THE BATTERY CHARGER MAINS LEAD TO A SUITABLE ELECTRICAL
SUPPLY. (SEE REAR OF CHARGER)
D. IF REQUIRED, SWITCH ON THE ELECTRICAL SUPPLY FOLLOWED BY THE CHARGER
“ON” SWITCH (IF FITTED).
E. MAKE SURE THAT THE MAINS POWER LED IS ILLUMINATED.
F. THE CHARGING AMBER LED WILL ILLUMINATE FOLLOWED BY THE FIVE RED LED’S
SHOWING PERCENTAGE OF CHARGE.
G. WHEN THE CHARGE IS COMPLETE THE GREEN LED WILL ILLUMINATE. THE
BATTERY. CHARGER CAN BE LEFT CONNECTED TO THE BATTERY UNTIL REQUIRED
FOR USE. THERE IS NO DANGER OF OVERCHARGING THE BATTERY.
H. THE MPL50 CHARGER HAS BEEN SET TO SUIT VARIOUS BATTERY TYPES FROM 80
TO 500 AMP/HOUR.
CHARGE INDICATION
BATT - Illuminated Green when a battery is connected correctly. Red
if incorrect.
CHARGE On Bulk charge / Flashing = Top off
READY Blue Battery able to start engine (LiFePO4 only)
READY Green Charge complete