Tractel 261579, Installation, Operating And Maintenance Manual

Page: 3 / 52

3
GB
time it is used. Any wire rope showing any signs
of damage must be immediately and definitively
removed from use.
24. During use, the operator must ensure that the
wire rope is constantly tensioned by the load and,
in particular, that the wire rope is not temporarily
neutralized by an obstacle when bringing a load
down, as this could result in rupture of the cable
when the load comes free from its obstacle.
25. Before use, systematically check that the high limit
stop is properly positioned and operates correctly.
26. During lifting and lowering operations, the operator
must constantly observe the maneuver and the load
to prevent any risks of snagging.
IMPORTANT :
For all professional uses, especially when the machine
is to be used by employee personnel, you must comply
with all work regulations applicable to installation,
maintenance and use of the equipment, in particular as
concerns the required inspections: inspection on first
use by user, periodic inspections, and inspections after
disassembly or repair.
2. PICTOGRAM DEFINITIONS
The symbol represents a warning and indicates
that the instructions must be carried out to prevent
personal injury. Non-compliance with such instructions
may lead to personal injury which, in some cases, may
also be very serious.
3. PACKING AND TRANSPORT
The hoist is supplied packed in a special plastic bag,
is recommended to protect the hoist using the special
plastic bag during transportation and in any moment
when is not under operation.
The overall weight of the packed machine is 37 kg.
At the time of purchase, the buyer must check that the
machine is undamaged and includes all the necessary
accessories (tie rod, clamps, instruction manual,
conformity declaration).
The device must be handled with care using appropriate
equipment and avoiding any type of impact.
In any case, the machine must be transported by two
persons.
Before handling the device, the user must first check
that:
a) the cable is completed wound on the drum and the
hook is attached to the machine structure.
b) the power supply outlet is disconnected.
4. MACHINE DECRIPTION
altotir™ 200 SINGLE-PHASE — HOIST WITH
MAXIMUM CAPACITY 200 kg.
The elevator should not carry loads greater than the
weight indicated on the relevant tag.
The hoist has been designed and built to lift
objects, materials or goods. It is absolutely prohibited
to use the machine to lift persons and/or animals or
as a public conveyance; this hoisting equipment is
designed to lift weights not exceeding 200 kg.
THIS EQUIPMENT SHOULD BE USED ONLY AS
DESIGNED.
5. CONSTRUCTION FEATURES
The hoist is equipped with an asynchronous, self-
braking motor with a brake normally blocked.
The hoist also includes a compact cascade reduction
unit.
6. TECHNICAL FEATURES
MOTOR
– A.C. asynchronous
– Self-braking with disk brake
– Closed version with external ventilation
REDUCTION UNIT
– Die-cast aluminium structure and supports
– Cylindrical gears
– Shafts mounted on ball bearings