Trackmaster FVX325, Field Service Manual

Page: 96 / 205

TRACKMASTER
August, 2006 FVX, TMX Series Service Manual
8-15
21. Replace the rear roller, push the rear roller as far forward as possible. Do not replace or start the
tensioning bolts at this time. Verify the guide for the belt deck and rollers is to the left during
installation.
22. Slide the front roller between the running belt, place the timing belt over the sprocket of the front
roller between the running belt, and place the timing belt over the sprocket of the front roller.
Replace the front roller. Verify the guide for the belt deck and rollers is to the left during
installation. Verify the timing belt goes around the front roller sprocket and that it is not
pinched. Replace the securing bolt and tighten.
23. Lift up the edge of the running belt and slide the deck onto the deck braces.
24. Tighten the cross brace securing bolts, use caution to avoid over tightening the bolts.
25. Align the bolt holes on the rear roller with the access hole of the end caps. Start the tensioning
bolts on the rear roller but do not tighten.
26. Replace the left and right end caps and replace securing screws.
27. Adjust the tension of the running belt; see Chapter 4 for Running Belt Tension
Procedure.
28. Reinstall hood by reversing procedure.
TMX Series