Trackmaster FVX325, Field Service Manual

Page: 42 / 205

TRACKMASTER
August, 2006 FVX, TMX Series Service Manual
5-11
5. P 5 will appear in the Center Display with default setting of 15.0 in the Incline
Window. Using the numeric keypad, change to 25.00 for medical units. For fitness
units use default of 15.0. Press SELECT key.
Center Display Action required Ct Parameter Options Observe
P 5 Enter Maximum Grade
needed INCLINE arrow
keys
M Grade 15 for 15% elevation
fitness units
25 for 25% elevation
medical units
15.0 appears in the
Center Display
6. P 6 will appear in the Center Display with default setting of 4 in the Speed Window.
Do Not Change This Number. Press SELECT key.
7. P 7 will appear in the Incline Display with default setting of 3175 n the Center
Display. Do not change this Number unless instructed to by the manufacturer . Press
SELECT key.
8. P 8 will appear in the Center Display . This setting used when the treadmill has
the Contact Heart-rate feature. If the treadmill only has the Polar ® Heart-rate
feature, use INCLINE arrows to change setting to
POLAR H-RATE . Press
SELECT key.
Center Display Action Required Changes Affect Parameter
Options Observe
P 8 Select Serial Heart-rate
or Polar Heart-rate by
using INCLINE arrow
keys
Select combined
Polar & contact
heart rate or Polar
only
Select Polar ®
H-rate for chest-
strap only
Hr appears in the
Incline Display, Pu
appears in the
Speed Display
9. P 9 will appear in the Center Display. Use the up Incline key to change to Normal
SCO . Medgraph SCO setting works only when the treadmill is used in conjunction
with a Medgraphics® Stress system. Press SELECT key.
Center Display Action Required Changes Affect Parameter
Options Observe
P 9 Select Medgraph
SCO or Normal
SCO by using
incline arrow keys
Selection of Medgraph SCO
allows serial communication
with the Medgraphics®
systems only. Selection of
Normal SCO allows serial
communication with other
stress systems
Medgraphics
SCO
Normal SCO
“SCO” appears
in the Incline
Display
10. P 10 will appear in the Center Display. Use Incline down key to change to ON if
RS232 port is to be used. Otherwise, RS232 port should remain off. Press SELECT
key.
Controller
Display Action Required Changes Affect Parameter
Options Observe
P 10 Select 232 Comm Off or
232 Comm On
by using incline arrow keys
Selecting 232 Comm
Off cuts off RS232 port
Selecting 232 Comm On
restores RS232 port
communication
232 Comm Off
232 Comm On “232” appears
in the Incline
Display