Trackmaster FVX325, Field Service Manual

Page: 62 / 205

TRACKMASTER
August, 2006 FVX, TMX Series Service Manual
5-31
16. Press Stop + Enter for SPD CAL will appear in the Message Center. This function
is used to calibrate speed. Press and hold ENTER key and the STOP key
simultaneously.
Automatic Calibration Clear Belt then press Start will appear in
the Message Center. Press START key. When the treadmill has completed this
process, the Message Center will read
Calibration Complete Press A key . If
calibration fails, Calibration Failed will appear in the Message Center. See trouble
shooting procedures for Speed Calibration Failed. Press ENTER key.
Controller
Display Action Required Changes Affect Parameter
Options Observe
Press Stop
+ Enter for
SPD CAL Press and hold
Enter key and
Stop key
simultaneously
to enter Speed
Calibration
Mode Adjusts speed
accuracy at all
speed ranges;
low, medium,
and high speeds N/A Press Stop +
Enter for GRD
CAL appears in
Message Center
17. Press Stop + Enter for GRD CAL will appear in the Message Center. This
function is used to reset the elevation grades. Press STOP +ENTER key for
calibration. Refer to Elevation Calibration Procedure. Press ENTER key to skip and
go into normal workout mode. Refer to FVX325, TMX425 Series Elevation Charts.
Controller
Display Action Required Changes Affect Parameter
Options Observe
Press Stop
+ Enter for
GRD CAL Press and hold
Enter key and
Stop key
simultaneously to
enter Elevation
Calibration Mode Adjusts
elevation %
accuracy at all
ranges N/A Controller will
shortly flash reset
phase (Figure 1-1)
followed by
software version
phase (Figure 1-2)
and finally idle
phase (Figure 1-3).
FVX325 Series Elevation Chart
Dim. Grade Inches MM
A 0% 3.04” [77.3mm]
B .5% 3.32” [84.3mm]
C 5% 5.62”
[142.8mm]
D 10% 8.42” [223.8mm]
E 15% 11.20” [284.5mm]
F 20% 13.48” [342.4mm]
G 25% 15.84” [402.4mm]