27
www.trace2o.com
Show Data Points:
For more detailed information the data points can be displayed
on the graph. Click the Tools option from the top menu and select
the ‘Show Data Points’ option to toggle them off and on.
The table of analyses (open files) at the bottom of the screen displays all of the
data currently loaded. The graphs can be toggled on and off using the tick box
on the left for each individual graph. The file names of the graphs displayed are
shown above the graph. The default filename is a date and time stamp in the
format YYYYMMDD_HHMMSS. The filename can be altered by saving the files
with a different name using the “File” menu and choosing “Save Data File As”.
If a file is saved with a different name the filename will
not be displayed until the file is re-loaded.
Right-clicking on any of the open files gives the following options:
When a blank scan is run through the instrument, this can be designated as
a baseline by right-clicking on the file and selecting ‘Use as baseline’.
To subtract the baseline from subsequent analyses, right click on the file you
wish to perform a background subtraction on, and click ‘Subtract baseline’.
NB:
The contents of the “File” menu will change according to which tab is currently in use.
