TP-Link TW-MR3220, User Manual

Page: 48 / 104

TL-MR3220 3G/4G Wireless N Router User Guide
-37-
notice in red as show below.
•
Type -
you can choose the type for the WEP security on the pull-down list. The default
setting is
Automatic
, which can select
Open System
or
Shared Key
authentication type
automatically based on the wireless station's capability and request.
• WEP Key Format - Hexadecimal
and
ASCII
formats are provided .
Hexadecimal
format stands for any combination of hexadecimal digits (0-9, a-f, A-F) in the specified
length.
ASCII
format stands for any combination of keyboard characters in the specified
length.
•
WEP Key (Password)-
Select which of the four keys will be used and enter the matching
WEP key that you create. Make sure these values are identical on all wireless stations in
your network.
•
Key Typ
e
-
You can select the WEP key length (64-bit, or 128-bit, or 152-bit.) for
encryption. "Disabled" means this WEP key entry is invalid.
64-bit -
You can enter 10 hexadecimal digits (any combination of 0-9, a-f, A-F, zero key is
not promoted) or 5 ASCII characters.
128-bit -
You can enter 26 hexadecimal digits (any combination of 0-9, a-f, A-F, zero key
is not promoted) or 13 ASCII characters.
152-bit -
You can enter 32 hexadecimal digits (any combination of 0-9, a-f, A-F, zero key
is not promoted) or 16 ASCII characters.

Note:
If you do not set the key, the wireless security function is still disabled even if you have
selected Shared Key as Authentication Type.
 WPA /WPA2 - Enterprise -
It’s based on Radius Server.
• Version -
you can choose the version of the WPA security on the pull-down list. The
default setting is
Automatic
, which can select
WPA (
Wi-Fi Protected Access) or
WPA2
(WPA version 2) automatically based on the wireless station's capability and request.
•
Encryption -
You can select either
Automatic
, or
TKIP
or
AES.

Note:
If you check the
WPA/WPA2 - Enterprise
radio button and choose TKIP encryption, you
will find a notice in red as shown below.