42
Chapter 4
Configure the Router in Standard Router Mode
network by their MAC addresses.
For example
, you want the wireless client A with the MAC
address 00-0A-EB-B0-00-0B and the wireless client B with the
MAC address 00-0A-EB-00-07-5F to access the router, but other
wireless clients cannot access the router
1. Visit
http://tplinkwifi.net
, and log in with the username and
password you set for the router.
2. Go to
Advanced
>
Wireless 2.4GHz
>
Wireless MAC Filtering
.
3. Click
Enable
to enable the Wireless MAC Filtering function.
4. Select
Allow the stations specified by any enabled entries in
the list to access
as the filtering rule.
5. Delete all or disable all entries if there are any entries already.
6. Click
Add New
and fill in the blanks.
1 ) Enter the MAC address 00-0A-EB-B0-00-0B/00-0A-EB-00-
07-5F in the MAC Address field.
2 ) Enter wireless client A/B in the Description field.
3 ) Leave the status as
Enabled
.
4 ) Click
Save
and click
Back
.
7. The configured filtering rules should be listed as the picture
shows below.
Now only client A and client B can access your network.
How can I
do that?
Done!
