manualshive.com logo in svg

TP-Link TL-WR902AC, User Manual, Page: 187 / 231

Share
Download
TP-Link TL-WR902AC User Manual Download Page 187

184

Chapter 7

 

Configure the Router in Range Extender Mode

7. 3.  Network

1.   Visit 

http://tplinkwifi.net

, and log in with the username and password you set for 

the router.

2.  Go to 

Setting 

> 

Network

 > 

LAN

.

3.  Configure the IP parameters of the LAN and click 

Save

.

• 

MAC Address

 - The physical address of the LAN ports. The value can not be changed.

• 

Type

 - Either select 

Dynamic IP(DHCP)

 to get IP address from DHCP server, or 

Static IP

 

to configure IP address manually.

• 

IP Address

 - Enter the IP address in dotted-decimal notation if your select 

Static IP 

(factory default - 192.168.0.1).

• 

Subnet Mask

 - An address code that determines the size of the network. Normally 

255.255.255.0 is used as the subnet mask.

• 

Gateway

 - The gateway should be in the same subnet as your IP address.

• 

Allow remote access

 - Allow remote devices to access the router by inputting the IP 

address in browser.

Note:

•  If you have changed the IP address, you must use the new IP address to login.
•  If you select 

Dynamic IP(DHCP)

, the DHCP server of the router will not start up.

Summary of Contents for TL-WR902AC








































































































































































































































Reviews:

No comments