TP-Link TL-WR902AC User Manual Download Page 208

Page: 208 / 231

205

Chapter 8

Configure the Router in Client Mode

•

Host Network

- This field displays the wireless name and connection status of the root

AP.

•

Traffic Statistics

- The router’s traffic statistics.

•

Received (Bytes)

- Traffic in bytes received from the WAN port.

•

Received (Packets)

- Traffic in packets received from the WAN port.

•

Sent (Bytes)

- Traffic in bytes sent out from the WAN port.

•

Sent (Packets)

- Traffic in packets sent out from the WAN port.

•

System Up Time

- The length of the time since the router was last powered on or reset.

Click

Refresh

to get the latest status and settings of the router.

8. 2. Operation Mode

1. Visit

http://tplinkwifi.net

, and log in with the username and password you set for

the router.

2. Go to

Setting

Operation Mode

3. Select the operation mode as needed and click

Save

8. 3. Network

1. Visit

http://tplinkwifi.net

, and log in with the username and password you set for

the router.

2. Go to

Setting

Network

LAN

3. Configure the IP parameters of the LAN and click

Save

Summary of Contents for TL-WR902AC








































































































































































































































Search results

Summary of Contents for TL-WR902AC

Reviews:

Related manuals for TL-WR902AC

Brands by name

Popular brands

TP-Link TL-WR902AC, User Manual

Search results

Summary of Contents for TL-WR902AC

Reviews:

Related manuals for TL-WR902AC

Brands by name

Popular brands