TL-WPA281/TL-WPA271
Wireless N Powerline Extender
12
I. By
PBC
If the wireless adapter supports Wi-Fi Protected Setup and the Push Button Configuration (PBC)
method, you can add it to the network by PBC with the following two methods.
Method One:
Step 1: Press the WPS button on the front panel of the device for 2 seconds.
Step 2: Within two minutes, press and hold the QSS button of the adapter directly for 2 or 3 seconds.
(QSS, also called WPS, is used by our company on the wireless adapter.)
Step 3: Wait for a while until the next screen appears. Click
Finish
to complete the WPS configuration.
The status LED on the Powerline Extender will light green for five minutes if the device has
been successfully added to the network.
The WPS Configuration Screen of Wireless Adapter
