37
z
Define motion detection area:
Click
Default
to select all images for motion detection.
Select
Add
and use mouse to specify a rectangle window to add a detection area. Select
Delete
and use mouse to specify a rectangle window to remove a detection area. The
area covered by transparent red color is motion detection area.
z
Set motion detection sensitivity:
Set the motion detection sensitivity level between 1
and 5. Level 5 means the highest motion detection sensitivity.
z
Set detection interval:
Set this value to define the interval of motion detection. If set
longer value, means system will use less CPU computing power to check motion
detection.
z
Adjust parameter by detection result:
When motion detection event is triggered,
system will display “M” at left-up corner and you can adjust these two parameters by
checking detection result to get best settings.
¾
Event Setting/ Edit Event / Advance Setting/ Block Detect:
z
Block detection could detect camera is blocked by something, detect area is set to full
image.
z
Set Sensitivity with higher level to trigger block alarm easier, otherwise set lower level to
