TP-Link Archer A2300 User Manual Download Page 9

Page: 9 / 118

Chapter 1

Get to Know About Your Router

Item

Description

Reset Button

Press and hold this button for more than 5 seconds to reset the router to its

factory default settings.

WPS Button

Press this button to enable the WPS function.

USB 2.0 Port

For connecting to a USB 2.0 device or a USB 2.0 printer.

USB 3.0 Port

For connecting to a USB 3.0 device or a USB 3.0 printer. It is also compatible

with USB 2.0 devices.

1. 2. 3. The Back Panel

The following parts (view from left to right) are located on the back panel.

Item

Description

Power Port

For connecting the router to a power socket via the provided power adapter.

Power On/Off Button

Press this button to power on or off the router.

Internet Port

For connecting to a DSL/Cable modem, or an Ethernet jack.

LAN Ports (1/2/3/4)

For connecting your PC or other Ethernet network devices to the router.

Antennas

Used for wireless operation and data transmit. Upright them for the best

Wi-Fi performance.

Summary of Contents for Archer A2300























































































































Search results

Summary of Contents for Archer A2300

Reviews:

Related manuals for Archer A2300

Brands by name

Popular brands

TP-Link Archer A2300, User Manual

Search results

Summary of Contents for Archer A2300

Reviews:

Related manuals for Archer A2300

Brands by name

Popular brands