TP-Link Archer A2300 User Manual Download

Page: 89 / 118

Chapter 14

Manage the Router

2. Select the correct

Start

date and time when daylight saving time starts at your local

time zone.

3. Select the correct

End

date and time when daylight saving time ends at your local

time zone.

4. Click

Save

14. 2. Control LEDs

The router‘s LEDs indicate router’s activities and status. You can turn on or turn off the
LEDs either from the web management page or by pressing the LED button.
1. Visit

http://tplinkwifi.net

, and log in with your TP-Link ID or the password you set for

the router.

2. Go to

Advanced

System Tools

LED Control

3. Tick the

Night Mode

checkbox.

4. Specify a time period in the

LED Off Time

as needed, and the LEDs will be off during

this period.

5. Click

Save

14. 3. Test the Network Connectivity

Diagnostics is used to test the connectivity between the router and the host or other
network devices.
1. Visit

http://tplinkwifi.net

, and log in with your TP-Link ID or the password you set for

the router.

2. Go to

Advanced

System Tools

Diagnostics

Summary of Contents for Archer A2300























































































































Search results

Summary of Contents for Archer A2300

Reviews:

Related manuals for Archer A2300

Brands by name

Popular brands

TP-Link Archer A2300, User Manual

Search results

Summary of Contents for Archer A2300

Reviews:

Related manuals for Archer A2300

Brands by name

Popular brands