TOYOTA
TUNDRA
2010 -
TVIP V4
Preparation
REMOTE ENGINE STARTER (RES)
Page 1 of 42 pages
Issue: E 04/07/10
Part Number: PT398-00100
PT398-00100-AA
NOTE:
Part number of this accessory may not be the same as
the part number shown.
Conflicts
Do not install into vehicles without RKE system.
Recommended Sequence of Application
Item #
Accessory
1
TVIP/RES Any TVIP or RES system
2
XM Radio
Kit Contents
Item #
Quantity
Description
1
1
Wire Harness
2
1
RES ECU Mounting Bracket
3
1
RES ECU Mounting Plate
4
1
Gateway ECU Bracket (See Page 2
for details)
Hardware Bag Contents
Item #
Quantity
Description
1
1
RES ECU
2
1
Gateway ECU
3
2-4
Small Foam Tape Strips (1 per.)
(See page 2 for details)
4
1
Large Foam Tape Strips (2 per)
5
25
Wire Ties
6
2
M6 Flange Nut
7
4
Window Warning Labels
(English/Spanish)
8
4
Key Labels (English/Spanish)
9
4
Key Tags (English/Spanish)
10
2
Engine Room Warning Labels
(English/Spanish)
11
1
Owner’s Manual
Additional Items Required For Installation
Item #
Quantity
Description
1
1
Hood Switch Kit (08586-oc920)
for vehicles without factory alarm.
(1 V4 Hood Latch, 2 Nut Covers)
2
1
V4 Adapter Kit (PT398-34112)
NOTE:
Refer to Page 18 to
determine if you will need this kit.
3
1
Black Electrical Tape
Recommended Tools
Personal & Vehicle
Protection
Notes
Safety Glasses
Safety Gloves
(Optional)
Vehicle Protection
Blankets, Parts Boxes, etc.
Special Tools
Notes
Terminal Tension Blade
Toyota SST # 00002-025BL-01
Or Sumitomo P/N 319-0000
Installation Tools
Notes
Screwdriver
#2 Phillips, Flat blade,
Jeweler's
Nylon Panel Removal Tool
e.g. Panel Pry Tool #1 Toyota
SST # 00002-06001-01
Side Cutters
Torque Wrench
36 in•lbf (4.7 N•m),
71 in•lbf (8 N•m),
88.5 in•lbf (10 N•m)
Utility Knife
Tape
Clear
Wrench
10mm
Socket
10mm, Extension
Special Chemicals
Notes
Cleaner
VDC Approved Cleaner
Glass Cleaner
Household Glass Cleaner
Legend
Care must be taken when installing this accessory to ensure damage does not occur to the vehicle. The installation of this
accessory should follow approved guidelines to ensure a quality installation.
These guidelines can be found in the "Accessory Installation Practices" document.
This document covers such items as:
Vehicle Protection (use of covers and blankets, cleaning chemicals, etc.)
Safety (eye protection, rechecking torque procedure, etc.)
Vehicle Disassembly/Reassembly (panel removal, part storage, etc.)
Electrical Component Disassembly/Reassembly (battery disconnection, connector removal, etc.)
Please see your Toyota dealer for a copy of this document.
STOP:
Damage to the vehicle may occur. Do not
proceed until process has been complied with.
OPERATOR SAFETY:
Use caution to avoid risk of
injury.
CAUTION:
A process that must be carefully observed
in order to reduce the risk of damage to the
accessory/vehicle and to ensure a quality installation.
TOOLS & EQUIPMENT:
Used in Figures calls out the
specific tools and equipment recommended for this
process.
REVISION MARK:
This mark highlights a change in
installation with respect to previous issue.
SAFETY TORQUE:
This mark indicates that torque is
related to safety.
