Toyota Prius 2019 Owner'S Manual Download

Page: 40 / 256

2-2. Connectivity settings

■

Connecting manually

When the auto connection has
failed or “Bluetooth power” is turned
off, it is necessary to connect the
Bluetooth

device manually.

Display the Bluetooth

settings

screen. (



P.38)

Follow the steps in “Connecting
a Bluetooth

device” from step

. (



P.38)

■

Reconnecting the Bluetooth

phone

If a Bluetooth

phone is discon-

nected due to poor reception from
the Bluetooth

network when the

power switch is in ACCESSORY or
ON mode, the system automatically
reconnects the Bluetooth

phone.

Up to 5 Bluetooth

devices can be

registered.

Bluetooth

compatible phones

(HFP) and audio players (AVP) can
be registered simultaneously.
This operation cannot be performed
while driving.

Display the Bluetooth

settings

screen. (



P.38)

Select “Add new device”.



When another Bluetooth

device

is connected



To disconnect the Bluetooth

device, select “Yes”.



When 5 Bluetooth

devices have

already been registered



A registered device needs to be
replaced. Select “Yes”, and
select the device to be replaced.

Follow the steps in “Registering
a Bluetooth

phone for the first

time” from step

. (



P.34)

This operation cannot be performed
while driving.

Display the Bluetooth

settings

screen. (



P.38)

Select “Remove device”.

Select the desired device.

Select “Yes” when the confirma-
tion screen appears.

Check that a confirmation
screen is displayed when the
operation is complete.

Registering a Bluetooth

device

Deleting a Bluetooth

device

Summary of Contents for Prius 2019

































































































































































































































































Search results

Summary of Contents for Prius 2019

Reviews:

Related manuals for Prius 2019

Brands by name

Popular brands

Toyota Prius 2019, Owner'S Manual

Search results

Summary of Contents for Prius 2019

Reviews:

Related manuals for Prius 2019

Brands by name

Popular brands