Toyota Prius 2019 Owner'S Manual Download

Page: 194 / 256

194

7-1. Phone operation (Hands-free system for cellular phones)



The following data is stored for
every registered phone. When
another phone is connected, the
following registered data cannot
be read:

• Contact data
• Call history data
• Favourites data
• Image data
• All phone settings
• Message settings

●

When a phone’s registration is
deleted, the above-mentioned data is

also deleted.

A lot of personal data is registered
when the hands-free system is
used. When selling or disposing of
the vehicle, initialize the data.
(



P.50)



The following data in the system
can be initialized:

• Contact data
• Call history data
• Favourites data
• Image data
• All phone settings
• Message settings

●

Once initialized, the data and settings

will be erased. Pay much attention

when initializing the data.

Display the phone top screen.
(



P.190)

Select the desired method to
call from.

■

Calling methods from phone
screen



By call history (



P.195)



By favourites (



P.195)



By contacts (



P.195)



By keypad (



P.197)



By message (



P.201)

■

Also the following lists are
available from each function’s
screen



By POI call (



P.66)



By speech command system
(



P.193)



SOS (



P.197)



By home screen (



P.197)

About the contacts in the
contact list

When selling or disposing of
the vehicle

Placing a call using the
Bluetooth

hands-free

system

After a Bluetooth

phone has

been registered, a call can be
made using the hands-free
system. There are several
methods by which a call can be
made, as described below.

Calling methods on the
Bluetooth

phone

Summary of Contents for Prius 2019

































































































































































































































































Search results

Summary of Contents for Prius 2019

Reviews:

Related manuals for Prius 2019

Brands by name

Popular brands

Toyota Prius 2019, Owner'S Manual

Search results

Summary of Contents for Prius 2019

Reviews:

Related manuals for Prius 2019

Brands by name

Popular brands