Toyota Highlander Hybrid 2017 Owner'S Manual Download Page 620

Page: 620 / 716

620

8-2. Steps to take in an emergency

HIGHLANDER_HV_U (OM48F12U)

NOTICE

■

When stowing the flat tire

●

Ensure that there is no object caught between the tire and the vehicle

underbody.

●

Securely tighten the spare tire clamp bolt to hold the spare wheel car-

rier by the hook.

●

Stow the flat tire in the spare tire location. Failure to do so may cause

damage to the spare tire carrier. Proper storage reduces the possibility

of injury in a collision or during sudden braking.

●

Have the flat tire repaired and the spare tire replaced with it as soon as

possible.

■

Proper storage of the spare tire

●

Do not attempt to turn the spare tire clamp bolt without a tire on the

hoist assembly, as doing so may cause the wire cable to slip off of the

shaft inside the unit and the wire cable may not be able to be raised or

lowered. If the spare tire clamp bolt has been turned without a tire on

the hoist assembly and the wire cable cannot be raised or lowered,

contact your Toyota dealer.

●

If the hoist assembly is slanted when

stowing a tire, the hoist assembly may

become stuck in the wheel opening

and the tire may not be raised prop-

erly, causing damage to the wheel or

the wire cable.

Summary of Contents for Highlander Hybrid 2017













































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Highlander Hybrid 2017

Reviews:

Related manuals for Highlander Hybrid 2017

Brands by name

Popular brands

Toyota Highlander Hybrid 2017, Owner'S Manual

Search results

Summary of Contents for Highlander Hybrid 2017

Reviews:

Related manuals for Highlander Hybrid 2017

Brands by name

Popular brands