Toyota Highlander Hybrid 2017 Owner'S Manual Download Page 599

Page: 599 / 716

599

8-2. Steps to take in an emergency

Wh
en tro

uble

ris

HIGHLANDER_HV_U (OM48F12U)

WARNING

■

Using the tire jack

Observe the following precautions.

Improper use of the tire jack may cause the vehicle to suddenly fall off

the jack, leading to death or serious injury.

●

Do not use the tire jack for any purpose other than replacing tires or

installing and removing tire chains.

●

Only use the tire jack that comes with this vehicle for replacing a flat

tire.

Do not use it on other vehicles, and do not use other tire jacks for

replacing tires on this vehicle.

●

Put the jack properly in its jack point.

●

Do not put any part of your body under the vehicle while it is supported

by the jack.

●

Do not start the hybrid system or drive the vehicle while the vehicle is

supported by the jack.

●

Do not raise the vehicle while someone is inside.

●

When raising the vehicle, do not put an object on or under the jack.

●

Do not raise the vehicle to a height greater than that required to

replace the tire.

●

Use a jack stand if it is necessary to get under the vehicle.

●

When lowering the vehicle, make sure that there is no-one near the

vehicle. If there are people nearby, warn them vocally before lowering.

Summary of Contents for Highlander Hybrid 2017













































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Highlander Hybrid 2017

Reviews:

Related manuals for Highlander Hybrid 2017

Brands by name

Popular brands

Toyota Highlander Hybrid 2017, Owner'S Manual

Search results

Summary of Contents for Highlander Hybrid 2017

Reviews:

Related manuals for Highlander Hybrid 2017

Brands by name

Popular brands