Toyota Highlander Hybrid 2017 Owner'S Manual Download Page 595

Page: 595 / 716

595

8-2. Steps to take in an emergency

Wh
en tro

uble

ris

HIGHLANDER_HV_U (OM48F12U)

: The hybrid system may not be restarted depending on the vehicle condi-

tion.

Once

⎯

The power switch has been
turned off with the shift lever in
a position other than P.

→

Shift the shift lever to P.

Once

⎯

After the power switch has
been turned off with the shift
lever in a position other than P,
the shift lever has been shifted
to P.

→

Turn the power switch off.

⎯

Power was turned off due to the
automatic power off function.

→

Next time when starting
the hybrid system, oper-
ate the hybrid system for
approximately 5 minutes
to recharge the 12-volt bat-
tery.

Con-
tinu-
ous

⎯

Indicates that the hybrid system
was stopped in an emergency
while driving

→

To restart the hybrid sys-
tem, shift the shift lever to
N and turn the power
switch to ON mode.

Once

⎯

Indicates that the power switch
has been pressed while driving

→

Except when emergency
stopping of the vehicle is
needed, immediately
release the power switch.

Interior

buzzer

Exterior

buzzer

Warning message

Details/Actions

(Flashes)

Summary of Contents for Highlander Hybrid 2017













































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Highlander Hybrid 2017

Reviews:

Related manuals for Highlander Hybrid 2017

Brands by name

Popular brands

Toyota Highlander Hybrid 2017, Owner'S Manual

Search results

Summary of Contents for Highlander Hybrid 2017

Reviews:

Related manuals for Highlander Hybrid 2017

Brands by name

Popular brands