Toyota Highlander Hybrid 2017 Owner'S Manual Download Page 610

Page: 610 / 716

610

8-2. Steps to take in an emergency

HIGHLANDER_HV_U (OM48F12U)

WARNING

■

Replacing a flat tire

●

Do not touch the disc wheels or the area around the brakes immedi-

ately after the vehicle has been driven.

After the vehicle has been driven the disc wheels and the area around

the brakes will be extremely hot. Touching these areas with hands, feet

or other body parts while changing a tire, etc. may result in burns.

●

Failure to follow these precautions could cause the wheel nuts to

loosen and the tire to fall off, resulting in death or serious injury.
• Have the wheel nuts tightened with a torque wrench to 76 ft•lbf (103

N•m, 10.5 kgf•m) as soon as possible after changing wheels.

• Do not attach a heavily damaged wheel ornament, as it may fly off

the wheel while the vehicle is moving.

• When installing a tire, only use wheel nuts that have been specifi-

cally designed for that wheel.

• If there are any cracks or deformations in the bolt screws, nut

threads or bolt holes of the wheel, have the vehicle inspected by

your Toyota dealer.

• When installing the wheel nuts, be sure to install them with the

tapered ends facing inward. (

→

P. 536)

●

Observe the following precautions.

Failure to do so may result in serious injury:
• Do not try to remove the wheel ornament by hand. Take due care in

handling the ornament to avoid unexpected personal injury.

• Lower the spare tire completely to the ground before removing it

from under the vehicle.

Summary of Contents for Highlander Hybrid 2017













































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Highlander Hybrid 2017

Reviews:

Related manuals for Highlander Hybrid 2017

Brands by name

Popular brands

Toyota Highlander Hybrid 2017, Owner'S Manual

Search results

Summary of Contents for Highlander Hybrid 2017

Reviews:

Related manuals for Highlander Hybrid 2017

Brands by name

Popular brands