Toyota Highlander Hybrid 2017 Owner'S Manual Download Page 617

Page: 617 / 716

617

8-2. Steps to take in an emergency

Wh
en tro

uble

ris

HIGHLANDER_HV_U (OM48F12U)

Install the inside spare tire
cover to the outside spare tire
cover.

Confirm it is not loose after
tightening:

Push and pull the tire
Try rotating

Visually check to ensure tire is
not hung on surrounding parts.
If looseness or misassembly
exists, repeat steps

Repeat step , any time the tire is lowered or disturbed.
Stow the jack and all tools.

■

The compact spare tire (vehicles with a compact spare tire)

●

The compact spare tire is identified by the label “TEMPORARY USE

ONLY” on the tire sidewall.

Use the compact spare tire temporarily, and only in an emergency.

●

Make sure to check the tire inflation pressure of the compact spare tire.

(

→

P. 646)

■

When the compact spare tire is installed (vehicles with a compact
spare tire)

The vehicle is lower when the compact spare tire is installed compared to

when standard tires are installed.

■

When using the compact spare tire (vehicles with a tire pressure
warning system)

As the compact spare tire is not equipped with a tire pressure warning

valve and transmitter, low inflation pressure of the spare tire will not be

indicated by the tire pressure warning system. Also, if you replace the

compact spare tire after the tire pressure warning light comes on, the light

remains on.

1
2

Summary of Contents for Highlander Hybrid 2017













































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Highlander Hybrid 2017

Reviews:

Related manuals for Highlander Hybrid 2017

Brands by name

Popular brands

Toyota Highlander Hybrid 2017, Owner'S Manual

Search results

Summary of Contents for Highlander Hybrid 2017

Reviews:

Related manuals for Highlander Hybrid 2017

Brands by name

Popular brands