Toyota Highlander Hybrid 2017 Owner'S Manual Download Page 534

Page: 534 / 716

534

7-3. Do-it-yourself maintenance

HIGHLANDER_HV_U (OM48F12U)

WARNING

■

Proper inflation is critical to save tire performance

Keep your tires properly inflated.

If the tires are not properly inflated, the following conditions may occur

which could lead to an accident resulting in death or serious injury:

●

Excessive wear

●

Uneven wear

●

Poor handling

●

Possibility of blowouts resulting from overheated tires

●

Air leaking from between tire and wheel

●

Wheel deformation and/or tire damage

●

Greater possibility of tire damage while driving (due to road hazards,

expansion joints, sharp edges in the road, etc.)

NOTICE

■

When inspecting and adjusting tire inflation pressure

Be sure to put the tire valve caps back on.

If a valve cap is not installed, dirt or moisture may get into the valve and

cause an air leak, resulting in decreased tire inflation pressure.

Summary of Contents for Highlander Hybrid 2017













































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Highlander Hybrid 2017

Reviews:

Related manuals for Highlander Hybrid 2017

Brands by name

Popular brands

Toyota Highlander Hybrid 2017, Owner'S Manual

Search results

Summary of Contents for Highlander Hybrid 2017

Reviews:

Related manuals for Highlander Hybrid 2017

Brands by name

Popular brands