Toyota Highlander Hybrid 2017, Owner'S Manual

Page: 78 / 716

78
1-1. For safe use
HIGHLANDER_HV_U (OM48F12U)
WARNING
■
When installing a child restraint system
●
When installing a child restraint system on the center second and third
seat, adjust both seat cushions to the same position (second seat only)
and align both seatbacks at the same angle. The seatbacks must be
adjusted to the same angle. Otherwise, the child restraint system cannot
be securely restrained and this may cause death or serious injury in the
event of sudden braking, sudden swerving or an accident.
●
When using the LATCH anchors for a child restraint system, move the seat
as far back as possible (second seat only), with the seatback close to the
child restraint system.
●
When a booster seat is installed, always ensure that the shoulder belt is
positioned across the center of the child’s shoulder. The belt should be
kept away from the child’s neck, but not so that it could fall off the child’s
shoulder. Failing to do so may result in death or serious injury in the event
of sudden braking, sudden swerving or an accident.
●
Ensure that the belt and plate are securely locked and the seat belt is not
twisted.
●
Shake the child restraint system left and right, and forward and backward
to ensure that it has been securely installed.
●
After securing a child restraint system, never adjust the seat.
●
Follow all installation instructions provided by the child restraint system
manufacturer.
●
When securing some types of child restraint systems in second or third
seats, it may not be possible to properly use the seat belts in positions
next to the child restraint without interfering with it or affecting seat belt
effectiveness. Be sure your seat belt fits snugly across your shoulder and
low on your hips. If it does not, or if it interferes with the child restraint,
move to a different position. Failure to do so may result in death or serious
injury.